Smart conference mixer FT-MX8P

This 8-channel digital conference mixer features a 32-bit processor, real-time PC software control, individual mic settings, volume monitoring, RS485/RS232C interfaces, voice activation, and USB driver-free upgrades. Supports up to 8 mics with adjustable modes and full system diagnostics.
Categories: ,
Get Quote
Categories ,
Description
  • Programmable 8-Channel Digital Conference Mixer: Embedded with a 32-bit ultra-high-speed RISC processor, high-performance real-time embedded operating system, and fully digital circuit design. Integrates digital mixer and conference functions, specifically for small-scale meetings.
  • PC Software: Can be used to set and view all parameters via a driver-free USB connection.
  • Individual Microphone Name Tags: Each microphone can be independently assigned a name tag, with real-time display of microphone status.
  • Real-Time Volume Monitoring: PC software and main unit display microphone volume levels (even when the microphone is off) and main output volume, simplifying on-site adjustments.
  • Bidirectional Data Synchronization: Changes made on either PC software or the main unit are automatically reflected in real time on the other side.
  • RS485 Encoding Function: Convenient for cascading multiple devices for control.
  • Microphone Control: Supports up to 8 microphones, each with independent control for volume, priority, speaking time, voice activation sensitivity, and phantom power.
  • Conference Modes: Includes FIFO (First In, First Out), Limited Mode, and Priority Mode.
  • Adjustable Speaker Numbers: The system can support 1 to 8 speakers, meeting a variety of on-site needs.
  • Microphone Modes: Each microphone can be set to mute, always-on, or normal voice-activated mode.
  • USB Driver-Free Upgrade: The system allows on-site upgrades and parameter fine-tuning via a driver-free USB connection.
  • Independent Microphone Time Setting: Each microphone’s auto-off time can be set independently, up to 999 seconds.
  • State Change with Encoding Function: The microphone status change triggers encoding, with the option to enable/disable through software. The encoding interface can be customized.
  • Central Control Function: Supports two-way central control serial interface to set all system parameters.
  • Self-Diagnostic Function: The system has a complete self-test function for diagnosing common faults on-site.
  • Adaptive Gain Function: Automatically adjusts inp
Parameter
Category Specification
Input Power Voltage 220V (±10%)
Power Consumption <50W
Microphone Phantom Power (Output) 48V (±1V)
Signal-to-Noise Ratio >75dB
Total Harmonic Distortion <0.5%
Channel Separation >95dB
Microphone Frequency Response 70Hz - 18kHz
Microphone Input Impedance 1KΩ
Voice Control Sensitivity -63dB to 0dB (63 levels adjustable, 0 = off, attenuation >95dB)
Microphone Volume Adjustment -63dB to 0dB (63 levels adjustable, 0 = off, attenuation >95dB)
Total Output Volume -63dB to 0dB (63 levels adjustable, 0 = off, attenuation >95dB)
Total Input Volume 63dB to 0dB (63 levels adjustable, 0 = off, attenuation >95dB)
Balanced Output Impedance 1KΩ
Unbalanced Output Impedance 1KΩ
Unbalanced Input Impedance 3.9KΩ
Microphone Recording Output Impedance 1KΩ
Central Control Interface Supports RS232C female
USB Control Supports USB Type B female (driver-free)
Microphone Trigger Voltage <100mV
Microphone Turn-On Time <350uS
Microphone Delay Time 1-999 Seconds
Dimensions (W x H x D) 42cm x 4cm x 21.5cm
Donwload
FT-MX8P
Get Quote

Your email address will notbe published, Required fields are marked

Product Related

Smart Conference Center F9

Analog conference unit G20 D

Digital and analog dual backup conference unit G20 MD