Indoor LED full-color display flexible screen (GOB) GPS125-JA
High-resolution LED display module with 256x128 pixels, wide viewing angles of 170°, and customizable installation for curved surfaces.
Categories: Dammam LED Screen Series
Lamp beads | SMD/1010 |
Scanning method | 64S |
Pixel pitch | 1.25mm |
Pixel structure | 1R1G1B |
Pixel density | 640000/㎡ |
Module resolution | 256 (W) * 128 (H) |
Module size | 320mm * 160mm |
Box size | Simple box is customized according to the curvature and size of the site |
Module display | Front-side GOB Process Treatment |
Main parameters | |
Visible viewing distance | ≥1 .25m |
Horizontal viewing angle | ≥170° Vertical viewing angle: ≥170° |
Color temperature | 1000K-10000K adjustable |
Flatness of the entire screen | ≤0.1mm |
Yes | Single point brightness and color correction |
Brightness uniformity | ≥99% |
White balance brightness | ≥500cd/㎡ |
Design | De-blanking drive protection circuit and high grayscale high refresh design |
Contrast | ≥10000:1 |
Refresh rate | ≥3840Hz |
Frame change Frequency | ≥60HZ |
Grayscale | 65536 |
Drive mode | constant current |
Control mode 1 | synchronous |
Control distance | network cable: 100 meters, optical fiber: 10 kilometers |
Signal interface | RJ45 interface |
Brightness adjustment range | 0 to 100 stepless adjustment |
Continuous working time | ≥72 hours |
Typical lifespan | 100,000 hours |
Protection level | IP5X, display front IP65 |
Safety Installation method | Customized simple box fixed installation |
Electrical parameters | |
Working voltage | DC: 4.2-5V |
Power supply requirements | AC: 220×(1±10%)V, 50×(1±5%)Hz |
Maximum power consumption | ≤650W/㎡ |
Average power consumption | ≤228W/㎡ |
Environmental parameters | |
Storage temperature range | -20℃ to 60℃ |
Working temperature range | -20℃ to 50℃ |
Working humidity range | 10%-80%RH without condensation |
Your email address will notbe published, Required fields are marked